一种电离层TEC格点预测模型

基于分析时间序列数据的门限控制单元（GRU）神经网络模型，利用电离层TEC网格点历史数据、太阳活动指数、地磁活动指数作为预测因子，提出一种高精度电离层TEC格点预测模型.对全球60个网格点的数据进行了模型预测和对比实验，得到北半球平均相对精度的均值为83.96%，高于南半球的73.60%，表明预测模型在北半球的适应性更好，且中低纬地区的适应性优于高纬地区；预测模型在磁扰动期的平均相对精度的均值比磁平静期平均相对精度的均值高，约1.95%；与基于递归神经网络（RNN）、长短时记忆网络（LSTM）和双向长短时记忆网络（Bi-LSTM）的电离层TEC单站预测模型相比，本文预测模型的均方根误差（RMSE）平均为原来的80.8%.      

具有复杂围护结构光学窗口的传热特性分析

针对具有复杂围护结构光学窗口传热特性,建立了高热流作用下的光学窗口及其复杂围护结构的辐射-导热传热模型,分别讨论了窗口的辐射半透明、光谱选择性、外部加热热流以及窗口尺寸对其瞬态温度响应的影响。结果表明,忽略窗口半透明特征会产生最大31.4%误差,忽略光谱选择性会产生最大40.4%误差;窗口外部气动加热热流影响显著,温度响应随热流的增大而急剧增大;窗口厚度对其传热特性的影响较大,随着厚度的增大窗口温度响应减小;而窗口半径产生的影响可忽略不计。     

星载激光通信终端在轨机动对温度影响

对激光通信终端在轨瞬态温度变化开展了仿真，以期研究在轨机动的影响、热分析和热试验时机动模式的简化模拟。通过合理地分析与简化，建立终端的轨道热分析模型，准确模拟在轨机动，根据典型机动模式、外热流和涂层退化等因素设计了计算工况，得出了终端在轨运行过程中的温度场随时间和姿态变化规律。结果表明：不同机动模式下的温度变化存在差异，最大可达23.0℃，采用固定姿态或一维转动的简化热分析或热试验不能准确模拟实际飞行温度，甚至不能部分替代二维转动热分析或热试验；光学天线和反射镜的温度控制是制约终端工作的瓶颈，为终端设计合适的避光机动策略，可大幅度提高温度稳定度和均匀度。研究结果可以为光机电设备在轨机动策略的设计和改进提供参考。     

Effect of matching between the magnetic field and channel length on the performance of low sputtering Hall thrusters

Discharge characteristics of a non-wall-loss Hall thruster were studied under different channel lengths using a design based on pushing a magnetic field through a double permanent magnet ring. The effect of different magnetic field intensities and channel lengths on ionization, efficiency, and plume divergence angle were studied. The experimental results show that propellant utilization is improved for optimal matching between the magnetic field and channel length. While matching the magnetic field and channel length, the ionization position of the neutral gas changes. The ion flow is effectively controlled, allowing the thrust force, specific impulse, and efficiency to be improved. Our study shows that the channel length is an important design parameter to consider for improving the performance of non-wall-loss Hall thrusters.     

Facile Fabrication of Hierarchical Porous N/O Functionalized Carbon Derived from Blighted Grains Towards Electrochemical Capacitors

The hierarchical porous N/O co-functionalized carbon(HPNOC)was scalably prepared by using the lowcost and renewable blighted grains as the raw material coupled with mild KHCO_3 activation for electrochemical capacitors(ECs).The elemental N was in situ doped in the obtained HPNOC without any N-containing additives.Remarkably,the obtained HPNOC was endowed with a large specific surface area(about 2 624m~2·g~(-1)),high pore volume(about 1.35cm~3·g~(-1)),as well as high-content N/O functionalization(about 1.9%(in atom)N and about 10.2%(in atom)O.Furthermore,the as-resulted HPNOC electrode with a high mass loading of 5mg·cm~(-2 )exhibited competitive gravimetric capacitances of about 373.6F·g~(-1 )at 0.5A·g~(-1),and even about 260.4F·g~(-1 )at a high rate of 10A·g~(-1);superior capacitance retention of about 98.8%at 1A·g~(-1 )over 10 000consecutive cycles;and high specific energy of about 9.6W·h·kg~(-1 )at a power of 500W·kg~(-1),when evaluated as a promising electrode in 6mol KOH for advanced electrochemical supercapacitors.More encouragingly,the green synthetic strategy we developed holds a huge promise in generalizing for other biomass-derived carbon materials for versatile energy-related applications.     

Local Path Planning and Tracking Control of Vehicle Collision Avoidance System

Automotive collision avoidance technology can effectively avoid the accidents caused by dangerous traffic conditions or driver's manipulation errors.Moreover,it can promote the development of autonomous driving for intelligent vehicle in intelligent transportation.We present a collision avoidance system,which is composed of an evasive trajectory planner and a path following controller.Considering the stability of the vehicle in the conflict-free process,the evasive trajectory planner is designed by polynomial parametric method and optimized by genetic algorithm.The path following controller is proposed to make the car drive along the designed path by controlling the vehicle's lateral movement.Simulation results show that the vehicle with the proposed controller has good stability in the collision process,and it can ensure the vehicle driving in accordance with the planned trajectory at different speeds.The research results can provide a certain basis for the research and development of automotive collision avoidance technology.     

高超声速飞行器再入段LQR自抗扰控制方法设计

针对高超声速飞行器(HSV)再入过程中强非线性、强耦合、气动参数变化剧烈的不确定性的特点，提出一种基于线性二次型调节器(LQR)和自抗扰控制(ADRC)的高超声速飞行器再入段的姿态控制方法。首先，建立高超声速飞行器再入段线性化模型，并采用LQR方法完成了状态反馈控制律设计。然后，结合自抗扰控制技术，设计了扩张状态观测器(ESO)对系统的模型不确定性和外部干扰进行补偿，大幅增强了系统的扰动抑制能力。最后，将得到的高超声速飞行器再入段LQR自抗扰姿态控制器(LQRADRC)应用于高超声速飞行器六自由度仿真，仿真结果表明本文所提出的控制方法能够快速、精确地跟踪角位置指令，并且对系统不确定性具有强鲁棒性。     

Evolution of UV-B regulation and protection in plants.

Plants have evolved under the influence of UV-B radiation and have acquired systems for monitoring it and investing appropriate resources for protection against it, i.e., filters, quenchers of radicals and reactive oxygen species, and repair systems. An hypothesis for how plants monitor radiation has been presented.